QBY pneumatic diaphragm pump

QBY pneumatic diaphragm pump

1. Pump peanut butter, kimchi, mashed potatoes, small red sausage, jam apple pulp, chocolate, etc.

2. Pumping paint, gum, and pigment.

3, adhesives and glue, all types can be pumped.

4, a variety of tiles, porcelain, bricks and pottery glaze.

5. After the oil well is drilled, pump the sediment and grout.

6. Pump various emulsions and fillers.

7. Pumping all kinds of sewage.

8. Use the pump as the tanker, and the barge clears the tank to absorb the sewage.

9, hops and fermented powder slurry, syrup, sugar dense.

10. Pumping water from mines, tunnels, tunnels, beneficiation, and slag. Pumping cement grout and mortar.

Pneumatic diaphragm pump overview

QBY series pneumatic diaphragm pump is a new type of conveying machine, which is a new type of pump in China. The air compressor is used as the power source for compressed air. For various corrosive liquids, liquids with particles, high viscosity, volatile, flammable and highly toxic liquids can be exhausted. Its performance parameters are similar to WLLDENPVMPS in the Federal Republic of Germany and MARIOWPUMPS in the United States. The factory has formed a series of production, with a total of eight specifications diameter: 10mm (3/8"), ¢15mm (1/2"), ¢25mm (1 "), ¢40mm (1 1/2"), ¢50mm (2"), ¢65mm (2 1/2"), ¢80mm (3"), ¢100mm (4"). Three materials, aluminum alloy, cast iron, stainless steel. The diaphragm pump uses nitrile rubber, neoprene rubber, fluororubber, and polytetrafluoroethylene according to different liquid media. To meet the needs of different users. Since its inception, the pump has been used by more than 1,000 domestic petroleum, chemical, electronics, ceramics, textile, paint, and pharmaceutical machinery systems. It is placed in special occasions to pump media that cannot be pumped by conventional pumps. And the ideal product to replace the gear pump, has taken a satisfactory result.

Main features of pneumatic diaphragm pump

1, no need to irrigate water, suction up to 7m, lift up to 50m, outlet pressure ≥ 6kgf / cm2;

2, the flow is spacious, the pass performance is good, allowing the diameter of large particles to reach 10mm. When pumping mud and impurities, the pump wears little;

3. The head and flow can be adjusted steplessly by the opening of the valve (the air pressure is adjusted between 1-7kgf/cm2);

4. The pump has no rotating parts and no shaft seal. The diaphragm separates the pumped medium from the moving parts of the pump and the working medium, and the delivered medium will not leak out. Therefore, when pumping toxic, easy to play or corrosive media, it will not cause environmental pollution and endanger personal safety;

5. It is not necessary to use electricity, and it is safe and reliable to use in flammable and explosive places;

6, can be submerged in the medium to work;

7. It is convenient in function and reliable in operation. It only needs to open and close the gas valve simply and openly. Even if there is no medium running or sudden stop due to unexpected conditions, the pump will not be damaged. If it is overloaded, the pump will automatically Ground stop, self-protection performance, when the load returns to normal, there is automatic start-up operation;

8. Simple structure and less wearing parts. The pump structure is simple to install and easy to maintain. The medium to be pumped will not touch the valve, the connecting rod and other moving parts, unlike other types of pumps due to the rotor, piston, gear, The wear of the blades and other components causes the performance to gradually decrease;

9, can transport a more viscous liquid (viscosity below 10,000 centipoise);

10. The pump does not need to be lubricated with oil. Even if it is idling, it has no effect on the pump. This is a major feature of the pump.



Pneumatic diaphragm pump main use

1. Pump peanut butter, kimchi, mashed potatoes, small red sausage, jam apple pulp, chocolate, etc.

2. Pumping paint, gum, and pigment.

3, adhesives and glue, all types can be pumped.

4, a variety of tiles, porcelain, bricks and pottery glaze.

5. After the oil well is drilled, pump the sediment and grout.

6. Pump various emulsions and fillers.

7. Pumping all kinds of sewage.

8. Use the pump as the tanker, and the barge clears the tank to absorb the sewage.

9, hops and fermented powder slurry, syrup, sugar dense.

10. Pumping water from mines, tunnels, tunnels, beneficiation, and slag. Pumping cement grout and mortar.

11, a variety of rubber pulp.

12. Various abrasives, corrosives, petroleum and mud, cleaning grease and general containers.

13, a variety of highly toxic, flammable, volatile liquids.

14, a variety of strong acid, alkali, strong corrosive liquid.

15, a variety of high temperature liquids can withstand 150 ° C.

16. As a pre-stage pressure supply device for various solid-liquid separation devices.

The rubber diaphragm is molded from natural rubber, and artificial additives are added to the rubber to improve the chemical resistance and bending properties of the separator.

Contact us if you need more details on High Quality of Diaphragm Pump. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Electromagnetic Pump、QBY Pneumatic Pump. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Diaphragm Pump